Clean

How to Clean an Automatic Slatted Pool Cover: A Step-by-Step Guide

Cleaning your automatic slatted pool cover is an essential part of maintaining both the cover
and your pool. Not only does it extend the life of your cover, but it also ensures the water
quality remains high and the area remains free of debris. Whether you're dealing with leaves,
dirt, or algae buildup or limescale, keeping your pool cover clean will prevent unnecessary
damage and enhance the aesthetic appeal of your backyard.

In this guide, we'll walk you through how to properly clean your automatic slatted pool cover.

Specially developed technology to combat dirty pool covers

Now, in a nutshell we hear a lot of people who don't like to see their slatted pool cover all
green due to algae. Moreover, even after a hard round of cleaning some algae remain whether
that's in the 'hidden chamber' or not. With our Slat Cleaner that will all be history. The Slat
Cleaner is entirely made out of RVS 316 stainless steel so it's a durable solution for the future.
With nothing but water, you'll be able to spray at high pressure straight into the groove
between 2 slats, which will allow you to clean your cover in an easy & efficient way, without
having to use expensive, chemical products over and over again. In fact, our cleaning tool is
the only durable way to get rid of those dirty algae in the hidden chamber of your pool cover.

Why Clean Your Pool Cover?

Automatic slatted pool covers are a great investment because they protect your pool from dirt,
debris, and even help maintain water temperature. However, without regular cleaning, dirt and
debris can accumulate between the slats, causing strain on the cover mechanism and affecting
its operation.

Here are a few reasons why you should clean your automatic slatted pool cover:

• Prevent Damage : Dirt, grime, and debris can wear down the material and damage the cover over time.
• Increase Lifespan : Regular cleaning can significantly extend the life of your pool cover.
• Maintain Pool Cleanliness : A clean cover prevents debris from entering the pool, keeping your water crystal clear and enhance the aesthetic appeal of your garden.

Tools You'll Need :

• A Slat Cleaner by Maison Mukade;
• A High-Pressure Washer;
• A garden hose;
• A power supply;
• An extension cable;
• Pure water;
• Gloves (optional);
• A towel or sponge (optional).

Step-by-Step Guide to Cleaning Your Automatic Slatted Pool Cover

Step 1: Remove Debris from the Surface

Before you start cleaning, it's important to clear the surface of the cover from any large debris
such as leaves, twigs, or insects. You can use a broom, leaf blower, or your hands to remove
loose debris.

Step 2: Hose Down the Cover

Next, use a garden hose to rinse off any loose dirt or grime. Start from one end and work your way
way down the cover, making sure the entire surface gets a thorough rinse.

• Why Hose It Down? Rinsing first helps loosen dirt and makes the cleaning process
more efficient. It also prevents dirt from scratching the surface when you scrub.

Step 3: We recommend to open the deck for 30cm. You push the SlatCleaner downwards
and sideways so the slats open a bit. This goes really smooth and natural. We advise
to open the deck for 30cm. You push the SlatCleaner downwards and sideways so
the slats open a bit. This goes really smooth and natural.

Pay special attention to any stubborn stains or spots. Go slower back and forth with the
SlatCleaner to ensure that dirt or algae isn't stuck in those hard-to-reach areas.

Tip: Don't use harsh cleaners like bleach, as they can damage the material of your cover.

Step 4: Dry the Cover

Use a towel or sponge to dry off the cover, especially if it's made from a material like vinyl or
fabric. This step is particularly important if you're cleaning your cover during colder weather
when water could freeze in the slats.

You can also allow the cover to air dry completely before you close it or store it for the
season.

Step 5: Check the Cover Mechanism

While the cover is clean, take a moment to inspect the automatic mechanism and motor. Make
make sure the slats are operating smoothly, and check for any signs of wear or damage. If you
notice any issues, it's best to get them addressed before they turn into bigger problems.

How Often Should You Clean Your Pool Cover?

The frequency of cleaning depends on factors such as the climate, your location, and how
often the cover is used. However, as a general guideline:

• Once a month during the pool season to keep it in good condition.
• After a storm or heavy rainfall to remove debris and prevent buildup.
• At the end of the swimming season for a deep clean before storing.

Additional Tips for Maintaining Your Slatted Pool Cover:

• Keep the Area Around the Pool Clean: Regularly clean the pool deck and surrounding areas to prevent debris from blowing onto the cover.
• Regularly Check for Pool Cover Damage: Inspect your cover for tears, holes, or signs of wear. If damage is noticed, make repairs as soon as possible to avoid further issues.
• Avoid Standing or Walking on the Cover: Even though it's designed to be durable, standing on the cover can cause unnecessary wear, especially if it's made from a delicate material.

Conclusion

Cleaning your automatic slatted pool cover doesn't have to be difficult. With just a little effort
and the right tool (Slat Cleaner 1600 by Maison Mukade), you can keep your cover in top
condition and extend its lifespan. Regular cleaning will ensure that your cover works
efficiently and continues to protect your pool for years to come.

By following these steps and maintaining your automatic slatted pool cover regularly, you'll
be sure to enjoy a cleaner pool, longer-lasting equipment, and more time to relax in your
beautiful backyard. Happy cleaning!